PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge Controller for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)

❶【Software Update MPPT Design】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%. Built-in DSP controller with high performance. Automatic battery voltage detection 12V/24V/36V/48V. Make sure batteries' voltage is more than 12V to boost controller and ensure the battery has enough power for Self-detection when connected to the controller.

❷【Multiple Battery Adaptation】Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.

❸【Full System Protection】Backlight LCD Display PV voltage/output power/Battery voltage/charging current/working mode/Temperature. ☀ TROUBLESHOOTING function and LCD display can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.

❹【Fan Heat Dissipation】Intelligent Fan-on temperature >45℃ and off < 40℃, Porous heat dissipation and fan using BEARING technologies increase life UP TO 5000hrs in normal use. Suitable for RVs, Commercial Vehicles, Boats, Yachts, and Solar systems.

❺【Notice】If you use sealed lead-acid, vented gel battery, and so on, you don't need to set any parameters; the controller can adjust automatically and work normally. However, if you use lithium batteries, you need to adjust the parameters properly according to the actual voltage of the battery because the voltage of lithium batteries is unstable. For example, an acid battery 12V is 12V, but a lithium battery 12V may be 11.1V or 14.8V.