Sanking 8" PTO Wood Chipper Tree Shredder 3 Point Farm Tractor Implement - with Hydraulic Feed

【TRUE 8"x 8" INFEED OPENING】: WC-8H offers a larger 8"x 8" infeed to easily accept those crooked branches. Other 8" chippers open 8" wide, but only 4-1/2" high

【FULLY ADJUSTABLE INFEED ROLLER TENSION SPRINGS】: WC-8H utilizes high-tension springs in conjunction with a unique adjustment mechanism that offers a full range of variable down pressure since all branches are different- some soft and some hard. This feature allows the user to increase to decrease the upper roller-down pressure to suit the situation. Crank up the tension to achieve up to 165 lbs. of down pressure. This allows the teeth on the roller to dig into the branches and ensure a smooth entry into the chipper head

【EASY SWIVEL DISCHARGE CHUTE】: 360 degrees of rotation and 2-finger operation. We have incorporated a convenient handle that effortlessly allows you to swivel the discharge chute so that you can direct the chips into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute. When you release the handle a spring-loaded pin drops down to lock the chute into position. No tools re quired.

【SAFETY AUTO-FEED STOP BAR】: Safety is paramount on our chippers. Located on the top of the in-feed bin, the WC-8H chipper utilizes an easy-to-activate auto-feed stop safety bar to disengage the in-feed rollers in case of an emergency or to clear the in-feed bin if necessary. This safety bar can be actuated and left in the off position, hands-free, so that the operator can use both hands to clear the in-feed bin. This feature is safer because it allows the user to start the chipper without the feed rollers turning. Other chippers require a hand on the safety bar to keep the feed rollers in the off position.

【HANDY FEED ROLLER ASSIST HANDLE LOCATED ON TOP OF MACHINE】: This feature allows the user to access the handle from either side of the machine. The center lift point allows the WC8-H chipper to use stronger tension springs, increasing the in-feed ability.

【WIDE FOOTPRINT SKID TYPE SUPPORT BASE】: Because of its robust weight and to prevent the machine from sinking into the soft ground during operation, the new WC-8H offers a wide footprints kid-type support base. This base is angled upward on the end to prevent digging into the ground while transporting.

【EASY KNIFE ACCESS PANELS】: WC-8H chipper knives can be changed from the side of the machine by one person in as little as 10 minutes. Other chippers require you to reach into the infeed bin to hold the head of the bolt, while someone else turns the nut from the backside of the flywheel.